5.4006.8501.0 B
4-26 Description and Operation
4.3.4 Settings
4.3.4.1 RealTime clock
This menu is used to set the date and time of the machine. The correct date setting is also important to
search for alert reports on a date.
Date 02-09-20 (dd/mm/yy).
Time 16:53:31 (hh/mm/ss).
4.3.4.2 Language
This menu is used to modify the language of the user interface.
4.3.4.3 Gyroscope
This menu is used to recalibrate the gyroscope. The machine must not be moved during the calibration.
4.3.4.4 Motor Power
The motor power must be high enough to overcome an unevenness or a slope. Otherwise it must not be
too high, because the control system uses the current value to detect an obstacle.
The motor power can be set to:
• Average.
• Low.
Do not modify the motor power without the consent of your local Lely service provider.
4.3.4.5 Wheel Diameter
Specifies the diameter of the wheels. The default diameter is 250 mm.
Do not modify this setting when the wheel diameter is not changed. This affects the
route accuracy.
in n o vato rs in ag ricu ltu r e
To Next Page
Loading...
Need help?
General
