5.4006.8501.0 B
Test and Adjustment 7-3
The standard value is 200 mSec.
5. Push
to confirm and go one level up.
7.2.6 Set the Water Fill Settings
1. Start the Lely Control Application (see page 5-4).
2. In the main menu select Settings and push
.
3. Select Water Discovery and push
.
4. Select Water in use.
5. Select Yes or No To set the water fill function 'On' or 'Off' (see Fill Water on page 4-27).
Close-up
1. Push
to confirm and go one level up.
7.3 Tests
7.3.1 Analyse the Reliability of a Route
1. Start the Lely Control Application (see page 5-4).
2. Stop the time path to take the machine out of operation (see Start or Stop the Time Path on page 5-
32).
3. In the main menu of the Lely Control app, select Routes and push
.
To Analyse the Reliability per Route
1. Select Route analysis and push
.
2. Select Fail. problty and push
.
Push or to display routes that are not displayed.
in n o vato rs in ag ricu ltu r e
To Next Page
Loading...
Need help?
General
