5.4006.8501.0 B
6-14 Maintenance
Figure 49. Do not clean the manure scraper with a
high pressure cleaner
Figure 50. Clean the manure scraper with water and
a brush
Close-up
1. Use a suitable lifting or tilting tool to put the machine back onto its wheels.
2. Clean the ultrasonic sensor with a tissue if it got dirty during cleaning of the manure scraper.
3. Manually drive the machine to the charging station (see Drive the Machine to the Charging Station on
page 5-6).
4. Start the time path to put the machine into operation (see Start or Stop the Time Path on page 5-32).
6.3.8 Clean the Covers
Preparation
Unexpected cow movement.
Risk of being crushed or trampled.
Block the cow traffic.
1. Manually drive the machine to a clean and quiet location (see Manually drive the Machine on page 5-
6).
Clean
Do not spray water on the vehicle.
1. Clean the upper cover with water and a brush.
in n o vato rs in ag ricu ltu r e
To Next Page
Loading...