5.4006.8501.0 B
Operating Instructions 5-5
Sometimes the phone must be paired with the machine before you can do the procedure
below.
The machine can not be connected to more than 1 smartphone simultaneously.
On the smartphone:
1. Start the Lely Control app.
2. If bluetooth was not in operation the following question (or similar) appears: The application tries to
switch on bluetooth, continue?
3. Push Yes.
4. Push the line Search for devices. The devices near the smartphone will be found. If one or more
devices are not found, repeat this step.
5. Push the line with the machine you want to operate. A connection will be made with the selected
machine. A green light is displayed in the title when the connection is made. The smartphone shows a
set of control buttons and a display that can be used to operate the software. If the smartphone loses
connection the green light turns red. Move towards the machine and make the connection again.
6. Push
.
7. If the machine was switched off, calibrate the gyroscope (see Calibrate the Gyroscope on page 8-19).
The buttons have the following function:
•
Execute the command on the display above the applicable soft button.
•
Starts or stops on action.
•
Moves the selector up one item or increases a value by one.
•
Moves the selector down one item or decreases a value by one.
•
Opens the selected function or the next menu screen.
•
Returns to the previous screen.
•
Reduces the speed of the vehicle.
in n o vato rs in ag ricu ltu r e
To Next Page
