Lenord+Bauer 7 Maintenance, Troubleshooting
GEL 2444 65
English
7 Maintenance, Troubleshooting
WARNING
Magnetic field!
● Ensure that there is at least 30 cm spacing between the implants
and the products.
CAUTION
Magnetic field!
● Hold the MiniCODER in such a way as to avoid crushing of fingers
or skin.
NOTICE
Electrostatic discharge!
● Only touch the connector pins and connection wires if your body is
suitably earthed.
The MiniCODER does not contain any moving parts and is therefore largely mainte-
nance-free.
Maintenance
When? What?
MiniCODER faulty ► Replace the MiniCODER.
Regularly ► Check the MiniCODER for damage.
► Make sure there are no foreign bodies in the installation space
for the MiniCODER.
Contamination!
Do not use a high pressure cleaner.
► Clean the MiniCODER with a damp cloth. Use only
water or a non-corrosive cleaning agent.
To Next Page
Loading...
