Lenovo ThinkServer TD350 - Replacing the Microprocessor

12.Closethesmallhandle1firstandthenclosethesmallhandle2tolocktheretainerandsecurethenew
microprocessorinthesocket.
Note:Therearetwomarksonthemicroprocessorretainer.Ensurethatyouclosethesmallhandle
markedwith
firstandthenclosethesmallhandlemarkedwith.Alwaysfollowthecorrectsequence
whenyouclosethesmallhandles.
Figure104.Securingthemicroprocessorinthesocket
13.Installthenewheatsinkthatcomeswiththemicroprocessoroptionkit.See“Replacingtheheat
sink”onpage169
.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage180
.
Replacingthemicroprocessor
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpageiiiand“Guidelines”onpage69.
CAUTION:
Theheatsinkandthemicroprocessormightbeveryhot.Turnofftheserverandwaitseveralminutes
tolettheservercoolbeforeremovingtheservercover.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
142ThinkServerTD350UserGuideandHardwareMaintenanceManual