Lenovo ThinkServer TD350 - Removing and Reinstalling the Pcie Card Holder

•Alignthetwoplastictabsofthefrontdoorwiththecorrespondingholesinthechassis.Then,move
thefrontdoorinwardandthenpullitslightlydownwarduntilitissecuredinplacebythetabs.
Figure42.Reinstallingthefrontdoor
11.Goto“Completingthepartsreplacement”onpage180.
RemovingandreinstallingthePCIecardholder
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpageiii
and“Guidelines”onpage69.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Note:Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationsinthistopic.
ToremoveandreinstallthePCIecardholder,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.If
theserverisintowerformfactor,laytheserveronitssideforeasieroperation.
3.Removetheservercover.See“Removingtheservercover”onpage72.
80ThinkServerTD350UserGuideandHardwareMaintenanceManual