72 NE1032T Installation Guide
Removing the NE1032T from a Lenovo iDataPlex Rack
ThissectiondescribeshowtoremovetheNE103 2T fromaLenovoiDataPlexrack.
ToremovetheNE1032TfromaniDataPlexrack,completethefollowingsteps:
1. Disconnectallexternalcables.
2. Ifthe1Uair‐ductoptionhasbeeninstalled,removeitasdescribedin“Removing
theAir‐DuctOption”onpage 74.
3. Loosen
andremovetheM6washers,screws,andclipnutsthatattachthealignment
plate.
4. LoosenandremovetheM6washersandscrewsthatmounttheswitchintothe
rack.
5. Slidetheswitchoutoftherack.
5
3
4