– System air baffle (see “Remove the system board air baffle” on page 226)
– Processor and memory expansion tray and expansion tray air baffle (see
“Remove
the processor and memory expansion tray” on page 219
)
2. Remove the expansion tray air baffle.
Figure 71. Removing the expansion tray air baffle
Step 2. Remove the memory module from the slot.
Figure 72. Removing a memory module
Open the retaining clip on each end of the memory module slot.
Grasp the memory module at both ends, and gently lift and remove it from the slot.
After this task is completed
1. Install a replacement unit (see
“Install a memory module” on page 182).
Chapter 4. Hardware replacement procedures 181
To Next Page
Loading...
