With four processors
with four processors installed, the two PCIe connectors on the expansion tray are also available. Follow the
instructions in this section to learn how do cable routing for combinations with one AnyBay backplane and
these two connectors.
Note: See
“Connecting cables to the processor and memory expansion tray” on page 50 to perform the
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
One backplane
One AnyBay backplane
On-board connector
SAS/SATA cable routing PCIe cable routing
Length
To
NVMe
connector
Length
To
1
845 mm
On-board
1 0-1, 2-3 530 mm
PCIe 3 (tray)
2 4-5, 6-7 670 mm
PCIe 6 (tray)
Chapter 3. Internal cable routing 91
To Next Page
Loading...
