Wiring the standard device
Basic devices in the power range 45 ... 55 kW
Important notes
5
5.6
5.6.2
5.6-3
EDSVF9333V EN 3.0-06/2005
5.6.2 Important notes
To gain access to the power connections, remove the cover:
Remove the cover of the drive controller
0
1
1. Remove the screws
2. Lift cover up and detach it
9300vec113
Installation material required from the scope of supply:
Description Use Amount
Cable ties 3.5 × 150 mm Strain relief/shield connection for motor cable 4
To Next Page
Loading...