Lenze EVF9324

Configuration
Code table
8
8.3

8.3-34
EDSVF9333V EN 3.0-06/2005
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0547 DIS: AN-IN -199.99 {0.01 %} 199.99 Function block DFOUT
z Display of the signal linked in
C0541
 8.2-8
C0548 DIS: SYN-RDY 0 1 Function block DFOUT
z Display of the signal linked in
C0544
C0549 DIS: DF-IN -32767 {1 rpm} 32767 Function block DFOUT
z Display of the signal linked in
C0542
C0560 -199.99 {0.01 %} 199.99
Configuration of fixed setpoints,
function block FIXSET1
z Output of the setpoints to
FIXSET1-OUT via binary coding
of the inputs FIXSET1-IN1 ...
FIXST1-IN4
See System
Manual
(extension)
1 FIX SET-VALUE 100
2 FIX SET-VALUE 75
3 FIX SET-VALUE 50
4 FIX SET-VALUE 25
5 FIX SET-VALUE 0
... ... 0
15 FIX SET-VALUE 0
C0561

CFG: AIN 1000 FIXED0%  Selection list 1 Configuration of analog input
signal, function block FIXSET1
z The analog input signal is
switched to FIXSET1-OUT if all
inputs FIXSET-INx = LOW
C0562

 Selection list 2 Configuration of digital input
signals, function block FIXSET1
z The number of inputs to be
assigned depend on the
number of the fixed setpoints
required.
1 CFG: IN 1000 FIXED0 FIXSET1-IN1
2 CFG: IN 1000 FIXED0 FIXSET1-IN2
3 CFG: IN 1000 FIXED0 FIXSET1-IN3
4 CFG: IN 1000 FIXED0 FIXSET1-IN4
C0563 DIS: AIN -199.99 {0.01 %} 199.99 Function block FIXSET1
z Display of the signal linked in
C0561
C0564 0 1 Function block FIXSET1
z Display of the signals linked in
C0562/1, C0562/2, C0562/3
and C0562/4
1 DIS: IN FIXSET1-IN1
2 DIS: IN FIXSET1-IN2
3 DIS: IN FIXSET1-IN3
4 DIS: IN FIXSET1-IN4
C0570

CFG: IN 1000 FIXED0%  Selection list 1 Configuration of analog input
signal, function block S&H1
See System
Manual
(extension)
C0571

CFG: LOAD 1000 FIXED0  Selection list 2 Configuration of digital input
signal, function block S&H1
C0572 DIS: IN -199.99 {0.01 %} 199.99 Function block S&H1
z Display of the signal linked in
C0570
C0573 DIS: LOAD 0 1 Function block S&H1
z Display of the signal linked in
C0571
C0574 MONIT OC2 0
0 TRIP
Configuration of monitoring OC2,
earth fault
See System
Manual
(extension)
3 Off