Installing the basic device
Basic devices in the power range 45 ... 55 kW
Important notes
4
4.3
4.3.1
4.3-1
EDSVF9333V EN 3.0-06/2005
4.3 Basic devices in the power range 45 ... 55 kW
4.3.1 Important notes
Theaccessorykitislocatedintheinsideofthedrivecontroller.
Remove the cover of the drive controller
0
1
1. Remove the screws
2. Lift cover up and detach it
9300vec113
4.3.2 Mounting with fixing brackets (standard)
Mounting material required from the scope of supply:
Description Use Amount
Fixing bracket Drive controller fixing 4
Hexagon head cap screw
M8 × 16 mm (DIN 933)
Mounting of fixing bracket to the drive
controller
4
Washer ∅ 8.4 mm (DIN 125) For hexagon head cap screw 4
Spring washer ∅ 8 mm (DIN 127) For hexagon head cap screw 4
To Next Page
Loading...