Lenze EVF9324

Configuration
Code table
8
8.3

8.3-24
EDSVF9333V EN 3.0-06/2005
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0360 0 65535 Telegram counter
z Display only
z At values > 65535, the counter
starts at 0
1 Message OUT All sent telegrams
2 Message IN All received telegrams
3 Message OUT1 Sent telegrams on CAN-OUT1
4 Message OUT2 Sent telegrams on CAN-OUT2
5 Message OUT3 Sent telegrams on CAN-OUT3
6 Message POUT1 Sent telegrams on parameter
channel 1
7 Message POUT2 Sent telegrams on parameter
channel 2
8 Message IN1 Received telegrams from
CAN-IN1
9 Message IN2 Received telegrams from
CAN-IN2
10 Message IN3 Received telegrams from
CAN-IN3
11 Message PIN1 Received telegrams from
parameter channel 1
12 Message PIN2 Received telegrams from
parameter channel 2
C0361 0 {1 %} 100 System bus load
z Display only
z To ensure a perfect operation,
the total bus l oad (all
connected devices) should be
less than 80%
1 Load OUT All sent telegrams
2 Load IN All received telegrams
3 LOAD OUT1 Sent telegrams on CAN-OUT1
4 LOAD OUT2 Sent telegrams on CAN-OUT2
5 Load OUT3 Sent telegrams on CAN-OUT3
6 Load POUT1 Sent telegrams on parameter
channel 1
7 LOAD POUT2 Sent telegrams on parameter
channel 2
8 Load IN1 Received telegrams from
CAN-IN1
9 Load IN2 Received telegrams from
CAN-IN2
10 LOAD IN3 Received telegrams from
CAN-IN3
11 LOAD PIN1 Received telegrams from
parameter channel 1
12 LOAD PIN2 Received telegrams from
parameter channel 2
C0364

CFG: CAN activ 1000 FIXED0  Selection list 2 Configuration - digital input
signal
z Switches the system bus via
the external signal from
”Pre-Operational” to
”Operational”
C0365 DIS:CAN activ
0 Pre-Operational
System bus state
z Display only
1 Operational