Leuze electronic BCL 8 S 2 Series - 4 Specifications; General Specifications BCL 8; Table 4.1; Technical Data

Specifications
Leuze electronic BCL 8 13
TNT 35/7-24V
4 Specifications
4.1 General specifications BCL 8
Optical data
Light source laser diode
Laser class 2 acc. to IEC 60825-1:2007 and U.S. 21 CFR 1040.10 with
Laser Notice No. 50
Wavelength 655nm
Max. output power (peak) ≤ 1.7mW
Impulse duration ≤ 420µs
Scanning rate M-optics: 600 scans/s
N-optics: 500 scans/s
Resolution M-optics: m = 0.150 … 0.500mm / 6 … 20mil
N-optics: m = 0.127 … 0.400mm / 5 … 16mil
Beam deflection by means of rotating polygon wheel
Beam exit at front, alternatively on the side with deflection mirror (105°)
Read distance see reading fields
Reading field opening see reading fields
Code types 2/5 Interleaved, Code 39, Code 128, EAN 128, EAN/UPC,
EAN Addendum, Codabar, Pharma Code, Code 93
Software features selectable output format, autoConfig, autoReflAct, reference
code comparison, multiple read, real time decoding, adjust-
ment mode, control of switching input or switching output, etc.
Electrical data
Interface type RS 232, freely configurable
Baud rate 4800 … 57600Bd
Data formats data bits: 7, 8
parity: none, even, odd
stop bit: 1, 2
Protocols framing protocol with/without handshake
software handshake X ON / X OFF
Service interface RS 232 with fixed data format,
9600Bd, 8 data bits, no parity, 1 stop bit
<STX> <data> <CR><LF>
Ports 1 switching input 5VDC
or
1 switching output 5 … 30V, 20mA
LEDs 1 device status
1 read status
Operating voltage 4.75 … 5.5VDC, Safety Class III - PELV
1)
(Protective Extra Low Voltage)
Current consumption max. 250mA (2W power supply unit recommended)
Table 4.1: Technical Data