Leuze electronic BCL 8 S 2 Series - 9 Communicating with the Device; Installing the Bclconfig Software; Figure 9.1: Installation Window

Communicating with the Device
44 BCL 8 Leuze electronic
9 Communicating with the Device
Device parameters can be set using the automatic configuration "autoConfig", with
commands via the serial interface or using the easy-to-use BCLConfig control software.
9.1 Installing the BCLConfig software
 Insert the installation CD into your drive
(also available on the Internet under www.leuze.de).
 Call up the installation file (e.g. Setup.exe).
 Select the installation language.
The following window appears:
Installation window
Figure 9.1: Installation window
 Confirm the following licence agreement and select the installation path in the following
window.