Important Parameters
56 BCL 8 Leuze electronic
10.8 Switch tab
Figure 10.11: Switch tab
Attention!
Depending on wiring, either a switching input or a switching output is available on the BCL 8.
By using an MA 8.1 or MA 8-01 connector unit, switching input and switching output can be
used simultaneously,
Activation
Select the desired event which is to initiate the switching of the switch-
ing output here. Multiple events can also be simultaneously activated.
Deactivation
Shown here is the event which results in the switching output being
reset (if the set pulse duration has not yet expired). Multiple events
can also be simultaneously activated.
Inverted
Level inverted.
Pulse duration
Duration of the switching output impulse.
To Next Page
Loading...
