Leuze electronic BCL 8 S 2 Series - Reference Code Tab; Figure 10.7: Reference Code Tab

Important Parameters
52 BCL 8 Leuze electronic
10.5 Reference code tab
Figure 10.7: Reference code tab
A reference code is bar code information which is stored in the memory of the scanner.
This reference code can be compared with the current decoded bar code in various modes
and, thus, the switching output be set appropriately. To do this, the switching output must
still be set to "By comparison of reference code X" in the "Switch" menu.
One way to store the reference code is to enter it manually in this menu. You can find further
options of the reference code teach-in in the chapter on online commands.
Type
Select the code type.
Contents
Contents of the reference code.
Compare mode
Select here how the internally stored reference code is to be com-
pared with the decoded result.
-> For additional comparison possibilities, please select the "Proper-
ties" menu