Leuze electronic BCL 8 S 2 Series - 10.4.1 Properties Window - Host Interface Tab; Figure 10.6: Standard Settings for the Properties Window - Host Interface Tab

Important Parameters
Leuze electronic BCL 8 51
TNT 35/7-24V
10.4.1 Properties window – Host interface tab
Figure 10.6: Standard settings for the Properties window – Host interface tab
Here, you can change the addresses settings and the protocol for sending and receiving.
To be able to continue to communicate with a BCL 8 following a parameter transfer, it may
be necessary to make appropriate adjustments to the communication properties of the
device in the BCL Configuration Tool.