Leuze electronic BCL 8 S 2 Series - Page 61

Online commands
Leuze electronic BCL 8 59
TNT 35/7-24V
autoConfig
Command ’CA’
Description
Activates or deactivates the 'autoConfig' function. Certain label reading
parameters are programmed automatically in the setup by the labels
which are read while the 'autoConfig' function is active.
Parameter
’+’ Activates ’autoConfig’
’/’ Rejects the last code read
’-’ Deactivates ’autoConfig’ and stores the decoded data in the current
parameter set
Acknowledg-
ment
’CSx’
x Status
’0’ Valid ’CA’ command
’1’ Invalid command
’2’ autoConfig could not be activated
’3’ autoConfig could not be deactivated
’4’ Result could not be deleted
Description
’xx yy zzzzzz’
xx Code type of the read code
’01’2/5 Interleaved
’02’Code 39
’06’UPC (A, E)
’07’EAN
’08’Code 128, EAN 128
’09’Pharmacode
’10’EAN/UPC
’11’Codabar
’12’Code 93
yy No. of digits of the read code
zzzzzz
Contents of the decoded label. The ↑ appears if the label was not
correctly read.