Device description
Leuze electronic BPS 307i 20
BCB bar code tape with 40 mm grid
1 Position label with position value
2 Cut mark
Figure 3.8: Bar code tape with 40 mm grid
The standard height of 47 mm can be adapted. Other BCB height (25 mm) and special heights on request.
Bar code tape BCB8 with 30 mm grid
1 Position label with position value
2 Cut mark
Figure 3.9: Bar code tape with 30 mm grid
The standard height of 47 mm can be adapted. Other BCB heights (25 mm and 30 mm) and special
heights on request.
With a standard bar code tape and a repair tape with 40 mm grid, the printed numerical values
are divisible by four without a remainder.
With a standard bar code tape and repair tape with 30 mm grid, the printed numerical values are
divisible by three without a remainder.
For bar code tapes with 30 mm grid, the designation
BCB8
is printed in plain text in addition to
the position value.
1 2
000040 000044 000048 000052
40
BCB8
BCB8
BCB8 BCB8
BCB8
000018 000021 000024 000027 000030
1 2
30
To Next Page
Loading...
