Need help?Do you have a question about the LevelOne WAB-5120 and is the answer not in the manual?
General| Brand | LevelOne |
|---|---|
| Model | WAB-5120 |
| Category | Wireless Access Point |
| Language | English |
Outlines essential safety measures to follow during hardware installation.
Details critical steps and warnings to prevent damage during installation.
Step-by-step instructions for physically connecting the device and its components.
Guides on connecting and using an external antenna with the WAB-5120.
Provides instructions for mounting the WAB-5120 unit onto a pole.
Step-by-step guide to access and log into the WAB-5120's web management interface.
Details how to configure fundamental system parameters like device name and network mode.
Guides on configuring IP address, subnet mask, and DHCP settings for the LAN.
Explains TCP/IP configuration specifics when the device is set to Router mode.
How to restrict outgoing traffic based on source IP addresses.
How to restrict incoming traffic based on destination IP addresses.
How to restrict outgoing traffic based on source port numbers.
How to restrict incoming traffic based on destination port numbers.
How to redirect incoming traffic to specific internal hosts.
Configuration for the Demilitarized Zone to expose specific services to the internet.
Explains the four available operating modes: AP, Client, Bridge, AP Repeater.
Specific settings for the first Virtual Access Point profile.
Methods to reset the device to its original factory default configuration.
To Next Page
