User Manual for PuraLev
®
iF100SU
www.levitronix.com
PL-4079-00, Rev00, DCO# 21-271
1 Safety Precautions
The PuraLev
®
iF100SU flow control system is designed to be used in industrial production machines and
laboratory equipment containing hydraulic circuits. Typical applications are Single-Use Bioprocessing
manufacturing equipment. Installation shall be done by qualified personnel only. Following safety precautions
and all “CAUTION”, “WARNING” and “DANGER” indications in the relevant sections shall be followed.
Do not under any circumstances open the driver. Levitronix
®
does not assume
responsibility for any damage, which occurs under such circumstances.
High magnetic field strength of pump impeller.
The flow control system contains a rotor magnet with high field strength. This
may alter or damage the calibration of sensitive electronic devices and
measuring instruments in the immediate surroundings. Keep at a safe distance
from computers, monitors and all magnetic data storage media (e.g. disks,
credit cards, audio and video tapes etc.)
Hazardous voltage may be present.
In case of the usage of an inadequate AC/DC power supply, mains voltages
may be present (even if the system is designed for up to 24 VDC). The usage
of a galvanic separated power supply, which is certified by a 3
rd
party (UL or
CE), is highly recommended.
Do not under any circumstances open the powered driver.
High magnetic field strength of pump impeller.
The flow control system contains a rotor magnet with high field strength.
Pacemakers may be influenced, and magnetic forces may lead to contusions.
Keep distance to pacemakers and handle impeller with care.
TOXIC CHEMICALS may be present.
When using the system to pump chemicals skin contact and toxic gases may
be hazardous to your health. Wear safety gloves and other appropriate safety
equipment.
To Next Page
Loading...
Need help?
General
