Levitronix PuraLev iF100SU - EasyConnect and OEM Model Operation with PLC

User Manual for PuraLev
®
iF100SU
www.levitronix.com
PL-4079-00, Rev00, DCO# 21-271
32
5.2 Operation of EasyConnect and OEM Model
5.2.1 Operation with PLC
Figure 30 and Figure 31 show the state diagram of the integrated pump and the integrated flowmeter.
Figure 30: PLC interface state diagram of pump for standard firmware
(For other configurations refer to relevant firmware documentation.)
OFF
Status pump: not
active
State 1
Power On
Flow Control Mode
Status pump: active
State 6
ERROR
Status pump: not
active
State 4
Priming: disabled
Enable: active
Reset: Pulse 300-700ms
Speed Control
Mode
Status pump: active
State 5
Internal
Error
Internal Error
Enable: not active
Flow converter is not in
Normal operation state
Flow converter is in
Normal operation state
Priming Mode
Status pump: active
State 10
Priming: enabled
Enable: active
Enable:
not active
Timeout,
Enable:
active