User Manual for PuraLev
®
iF100SU
www.levitronix.com
PL-4079-00, Rev00, DCO# 21-271
OEM - Driver, one multi-purpose connector, pump head socket
EasyConnect - Driver with interface connectors, pump head socket.
Stand-Alone - Driver with integrated user panel, pump head socket.
Table 1: Standard driver system configurations
Integrated Flow
Control Driver
(“OEM Model”)
Integrated Flow
Control Driver
(“EasyConnect” Mod.)
Integrated Flow
Control Driver
(“Stand-Alone” Model)
Table 2: Specification of standard components
Note 1: Designed and tested for IP67. Note 2: Gamma irradiated and sterile fittings version available (see product literature for PuraLev-i200SU).
LEVIFLOW
®
Single-
Use Flow Sensors
LFS-06SU-Z (8 lpm)
LFS-06SU-Z-SC1
1
LFS-10SU-Z (20 lpm)
LFS-10SU-Z-SC1
1
100-30377
100-30394
100-30397
100-30408
Triclamp 3/8”
Triclamp 3/8”
Triclamp 1/2”
Triclamp 1/2”
Polypropylene (FDA, USP Class VI,
BSE/TSE/Animal free)
Gamma stable for up to 40 kGy.
See Levitronix
®
technical brochure of
LFS-SU single-use sensor series for
more detailed specifications and for
other configurations.
Table 3: Specification of LEVIFLOW
®
single-use high-precision (1% accuracy of reading) flow sensors compatible with IFD-30 drivers
Note 1: Extended calibration for wider 1% accuracy range. Note 2: All flow sensors available with gamma irradiation (see LEVIFLOW
®
product literature for details).
Voltage Output / Input
Basic Dimensions
Certification or Standards
24 VDC with 180 W / 85 132 and 187 264 VAC (autoselect)
110 x 110 x 54 mm (mountable on DIN rail 35 mm)
UL/cUL, CB, Semi F47
Desktop AC/DC
Power Supply
Voltage Output / Input
Basic Dimensions
Safety Approvals
Note
24VDC, 160W / 85 264 VAC, 47-63 Hz
175 x 72 x 35 mm
UL60950-1, CSA C22.2, TUV EN60950-1
Connector for direct connection to power supply of driver with cable length 1.2 m.
AC Mains Cables
(for desktop supply 7b)
AMC-1.1 (2m)
AMC-1.2 (2.5m)
AMC-1.3 (2.5m)
AMC-1.4 (2.5m)
AMC-1.5 (2.5m)
190-10331
190-10332
190-10333
190-10334
190-10335
Approvals and Country
Approvals and Country
Approvals and Country
Approvals and Country
Approvals and Country
UL, cUL, US, Canada
CB, Germany, Denmark, Norway, Finland, Belgium, Netherland, Sweden, Austria
PSE, Japan
Switzerland
CE, United Kingdom
USB to RS485
Adaptor-TR
Isolated
USB connector (A) with termination resistor and cable (2m) with connector (B and C) for
external RS485 wire connection. Magnetically isolated. Cable length is 2m. Included is
a USB space saver cable (D).
Communication over fieldbus of driver with PC
Cable Material / Wires
Connection In / Out
Main Purpose
PVC jacket / 3x 0.5 mm
2
(only 2 wires used, 1 is cut)
Open wires / Circular Hirose type to driver
-Alon
ICS-1.1-01 (0.1 m)
ICS-1.1-10 (1 m)
ICS-1.1-30 (3 m)
190-10343
190-10344
190-10345
Cable Material / Wires
Connection In / Out
Main Purpose
PVC jacket / 6x 0.08 mm
2
and shielding
Circular Hirose type / Circular Hirose type
Fieldbus
ICS-1.2-50 (5 m)
ICS-1.3-50 (5 m)
Cable Material / Wires
Connection In / Out
Purpose ICS-1.2 / ICS-1.3
PVC jacket / 6x 0.08 mm
2
and shielding
Connector with screw type plug for open wire connection / Circular Hirose type
-
IPS Cable Signal
12 Wires
Cable Material / Wires
Connection In / Out
Main Purpose
PVC jacket / 12x 0.14 mm
2
and shielding
Connector with screw type plug for open wire connection / Circular Hirose type
General connection
IPS Cable Hybrid
15 Wires
ICH-1.1-30 (3 m)
ICH-1.1-50 (5 m)
Cable Material / Wires
Connection In / Out
Main Purpose
PVC jacket / 2x 1.5 mm
2
for supply wired, 13x 0.14 mm
2
for signal and shield wire
Open wires / Circular hybrid connector for driver connection
Fieldbus Termination
Connector
PPS for connector housing and FPM for sealing.
Termination of fieldbus.
LMK-1.2 (for LFS-06SU)
LMK-2.2 (for LFS-10SU)
Material / Structure
Main Purpose
Anodized Aluminium / Locking pin concept
For mouting of LFS-03SU and LFS-06SU flow sensors.
Interface / Housing Rating
Standard Firmware
Table 4: Specification accessories