Lexmark C510 - Color Menu

Color Menu
134
Using printer menus
Color Menu
Use the Color Menu to adjust print quality and customize color printing.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose Values
Color
Balance
To provide users with the ability to
make subtle color adjustments to
printed output by increasing or
decreasing the amount of toner being
used for each color plane individually.
This function is only applied to files
printed using the PostScript driver.
Cyan -5, -4, -3, -2, -1, 0*, 1, 2, 3, 4, 5
• -5 is maximum decrease
• 5 is maximum increase
Magenta
Yellow
Black
Reset Defaults Sets values for Cyan,
Magenta, Yellow, and Black to
0 (zero).
Color
Correction
To adjust the printed color to better
match the colors of other output
devices or standard color systems.
Due to the differences between
additive and subtractive colors, certain
colors that appear on your monitor are
impossible to duplicate on your printer.
Auto* Applies different color
conversion tables to each
object on the printed page,
depending upon the type of
object and how the color for
each object is specified.
Off No color correction is
implemented.
Manual Lets you customize the color
conversion tables applied to
each object on the printed
page, depending upon the
type of object and how the
color for each object is
specified. Customization is
performed using the selections
available under the Manual
Color menu item.