Network Menu
145
Using printer menus
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Print Buffer To print any data stored in the print buffer.
Note: Print Buffer is only available when you enter the Job Menu while Waiting is
displayed. The Waiting state occurs if an incomplete job is sent to the printer or an ASCII
job, such as a print screen command, is printing.
Reset Printer To reset the printer to the user default value for each menu item, delete all downloaded
resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete
all data in the interface link buffer.
Before selecting Reset Printer, exit the software application you are using.
Menu Item Purpose Values
Job
Buffering
To temporarily store jobs on the
printer hard disk before printing.
Note: Changing this menu item
automatically resets the printer.
This menu item is displayed only
when a formatted disk is installed.
Off* Does not buffer jobs to the hard
disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer
is busy processing data from
another input port.
MAC Binary
PS
To configure the printer to process
Macintosh binary PostScript print
jobs.
On Printer processes raw binary
PostScript print jobs from
computers using the Macintosh
operating system.
Note: This setting often causes
Windows print jobs to fail.
Off Printer filters PostScript print jobs
using standard protocol.
Auto* Printer processes print jobs from
computers using either Windows
or Macintosh operating systems.
Menu Item Purpose Values
To Next Page
Loading...
