Lexmark C510 - USB Menu

USB Menu
168
Using printer menus
USB Menu
Use the USB Menu to change printer settings affecting a Universal Serial Bus (USB) port (USB
Option <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Replace
Supplies
Lets you specify if these supply items are replaced before they are low or in the
maintenance state. Not Replaced is displayed as the current value, so you must press
Menu, scroll to Replaced, and press Select. This is a precaution so you do not
accidently reset a counter.
This menu item is shown in the Supplies Menu when the supply is not in an exhausted or
near exhausted state.
1 Select the supply. Yellow Toner
Magenta Toner
Cyan Toner
Black Toner
Photodev Cart
Fuser
2 Select the value. Not Replaced
Replaced
Menu Item Purpose Values
Job
Buffering
To temporarily store jobs on the
printer hard disk before printing.
Note: Changing the Job Buffering
menu item automatically resets the
printer.
Off* Does not buffer print jobs to the
hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer
is busy processing data from
another input port.
MAC Binary
PS
To configure the printer to process
Macintosh binary PostScript print
jobs.
Off Printer processes raw binary
PostScript print jobs from
computers using the Macintosh
operating system.
Note: This setting often causes
Windows print jobs to fail.
On Printer filters PostScript print jobs
using standard protocol.
Auto* Printer processes print jobs from
computers using either Windows
or Macintosh operating systems.
Menu Item Purpose Values