Lexmark C510 - Finishing Menu

Finishing Menu
139
Using printer menus
Finishing Menu
Use the Finishing Menu to define how the printer delivers the printed output.
Note: Values marked by an asterisk (*) are the factory default settings.
Cartridge
Yield
Specifies the color and yield of the
toner cartridge you plan to replace.
1 Select the toner cartridge to be
replaced.
2 Select the yield of the toner cartridge to be
replaced.
Cyan Standard Yield* Changes to the yield do not
take effect until you exit the
Config Menu. See Exit
Config Menu as follows. You
should change the setting for
the Cartridge Yield menu item
before you replace the toner
cartridge. See Changing the
toner cartridge yield for
instructions.
Magenta High Yield
Yellow
Black
Exit Config
Menu
No selections exist for this menu item. Press Select to exit the Config Menu and restart
the printer.
Menu Item Purpose Values
Blank Pages To specify whether to include
application-generated blank pages
as part of your printed output.
Do Not Print* Does not print application-
generated blank pages as part of
your job.
Print Prints application-generated blank
pages as part of your job.
Collation To keep the pages of a print job
stacked in sequence when printing
multiple copies of the job.
Off* Prints each page of a job the
number of times specified by the
Copies menu item. For example, if
you set Copies to 2 and send three
pages to print, the printer prints
page 1, page 1, page 2, page 2,
page 3, page 3.
On Prints entire job the number of
times specified by the Copies
menu item. For example, if you set
Copies to 2 and send three pages
to print, the printer prints page 1,
page 2, page 3, page 1, page 2,
page 3.
Menu Item Purpose Values