Lexmark C510 - Page 140

Finishing Menu
140
Using printer menus
Copies To set the number of copies you
want for the printer default value.
(Set the number of copies required
for a specific job from the printer
driver. Values selected from the
printer driver always override
values selected from the operator
panel.)
1...999 (1*)
Duplex To set duplexing as the default for
all print jobs. (Select Duplex from
the printer driver to duplex only
specific jobs.) Duplex means two-
sided printing.
Note: This menu item is displayed
only when the optional duplex unit
is installed.
Off* Prints on one side of the paper.
On Prints on both sides of the paper.
Duplex Bind To define the way duplexed (two-
sided) pages would be bound, and
how the printing on the back of the
sheet (even-numbered pages) is
oriented in relation to the printing
on the front (odd-numbered
pages).
Note: This menu item is displayed
only when the optional duplex unit
is installed.
Long Edge* Assumes binding along the long
end of the page (left edge for
portrait orientation and top edge
for landscape orientation).
Short Edge Assumes binding along the short
edge of the page (top edge for
portrait orientation and left edge
for landscape orientation).
Multipage
Border
To print a border around each
page image when using Multipage
Print.
None* Does not print a border around
each page image.
Solid Prints a solid line border around
each page image.
Menu Item Purpose Values