Replacing the fuser
69
Maintenance
Replacing the fuser
When 87 Fuser Life Warning appears on the operator panel, you need to replace the fuser soon.
Make sure you have ordered one. See Ordering a fuser for more information.
When 87 Fuser Exhausted appears on the operator panel, you must replace the fuser
immediately.
CAUTION: The fuser and the inside of the printer near the fuser may be hot. Wait for it to cool
before replacing the fuser.
1 Turn the printer off.
2 Push the rear door release latch.
3 Gently lower the rear door.
To Next Page
Loading...
