Understanding printer messages
173
Understanding printer messages
Close Duplex Door The duplex rear door is open. Close the duplex rear door to clear the
message.
Close Front Door The printer front door is open. Close the printer front door to clear the
message.
Close Rear Door The printer rear door is open. Close the printer rear door to clear the
message.
Close Top Door The printer top door is open. Close the printer top door to clear the
message.
Defragmenting
DO NOT POWER OFF
The printer is defragmenting the
flash memory to reclaim storage
space occupied by deleted
resources.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Delete All Jobs.
Go/Stop?
The printer is requesting
confirmation to delete all held jobs.
Press Go to continue. The printer
deletes all held jobs.
Press Stop to cancel the operation.
Deleting Jobs The printer is deleting one or more
held jobs.
Wait for the message to clear.
Did you replace
Photodev Cart?
Press Select for YES
Stop for No
This message appears when the
top door is closed or when you
answer another replacement
message, and the photodeveloper
cartridge is either in a warning or
exhausted state requiring that you
replace it.
The secondary message appears
with instructions.
Replace the photodeveloper cartridge
and press Go. Pressing Go clears the
maintenance counter.
Press Stop to continue printing. This
does not clear the maintenance counter.
The 83 Photodev Exhausted returns
after pressing Stop. The photodeveloper
cartridge remains in the warning state,
and this message appears again each
time the top door is opened.
Did you replace
Fuser?
Press Select for YES
Stop for No
This message appears when the
rear door is closed or when you
answer another replacement
message, and the fuser is either in a
warning or exhausted state
requiring that you replace it.
The secondary message appears
with instructions.
Replace the fuser and press Go.
Pressing Go clears the maintenance
counter.
Press Stop to continue printing. This
does not clear the maintenance counter.
The fuser remains in the warning state,
and the message appears again each
time the rear door is opened.
Disabling Menus The printer is responding to a
request to disable the menus.
Wait for the message to clear.
While the menus are disabled, you
cannot change the printer settings from
the operator panel.
See also: Disabling operator panel
menus
Message What this message means What you can do
To Next Page
Loading...
