Cleaning the printhead lens
78
Maintenance
4 Press and release Menu until you see one of the following items based on the one you
replaced. Make sure the one you want to select is on the second line of the operator panel.
5 Press Select.
6 Press and release Menu until you see Replaced, and then press Select.
The Saved message appears. Press and release Return until the printer returns to the Ready
state.
Cleaning the printhead lens
Clean the printhead lens when you see print quality problems as mentioned in Solving print quality
problems in the Troubleshooting chapter.
1 Turn the printer off.
2 Pull the front door release latch forward and gently lower the front door. See the illustration in
step 1 on page 65 if you need help.
3 Remove all of the toner cartridges one at a time. See the illustration in step 2 on page 65 if
you need help.
4 Open the top door. See the illustration in step 1 on page 74 if you need help.
5 Remove the photodeveloper cartridge. Complete step 2 on page 74 through step 3 on
page 75 to remove the photodeveloper cartridge.
Yellow Toner
Magenta Toner
Cyan Toner
Black Toner
Photodev Cart
Fuser
To Next Page
Loading...
