Lexmark C510 - Supplies Menu

Supplies Menu
166
Using printer menus
Supplies Menu
The Supplies Menu provides information about printer supplies that require attention. It is only
available when a supply is low or needs replacement.
Wait
Timeout
To specify the amount of time (in
seconds) the printer waits to
receive additional bytes of data
from the computer. When this
timeout expires, the print job is
canceled.
Wait Timeout is only available
when you use PostScript
emulation. This menu item has no
effect on PCL emulation print jobs.
Disabled Disables Wait Timeout.
15...65535
(40*)
Specifies the amount of time the
printer waits for additional data
before it cancels the job.
Menu Item Purpose Values
<color>
Toner
To view the status of the color
toner cartridges where <color>
represents yellow, magenta, cyan,
or black.
Low
Waste
Bottle
To view the status of the toner
waste bottle.
Note: Once the toner waste bottle
reaches Full, the printer will print
up to 15 more pages from the
buffer and then stop until the bottle
is replaced.
Near Full The toner waste bottle is nearly
full.
Full or
Missing
The toner waste bottle is full or is
missing from the printer.
Photodev
Cart
To view the status of the
photodeveloper cartridge.
Life Warning The photodeveloper cartridge is
close to reaching its end of use.
Exhausted The photodeveloper cartridge is
completely used.
Fuser To view the status of the fuser.
This menu item is shown in the
Supplies Menu when the supply is
not within life warning or
exhausted state.
Life Warning The fuser is close to reaching its
end of use.
Exhausted The fuser is completely used.
Menu Item Purpose Values