EasyManua.ls Logo

Lexmark C510 - Page 165

Lexmark C510
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup Menu
165
Using printer menus
Print
Timeout
To specify the amount of time (in
seconds) the printer waits before
printing the last page of a print job
that does not end with a command
to print the page. The print timeout
counter does not start until
Waiting is displayed.
Disabled The printer does not print the last
page of a print job until one of the
following occurs:
The printer receives enough
information to fill the page.
The printer receives a Form
Feed command.
You select Print Buffer from the
Job Menu.
1...255 (90*) The printer prints the last page
after the specified time. (Your
printer may not support the entire
range of values.)
Printer
Language
To establish the default printer
language used to communicate
data from the computer to the
printer.
Note: Setting a printer language
as the default does not prevent a
software application from sending
print jobs that use the other
language.
PCL
Emulation*
PCL emulation, compatible with
Hewlett-Packard printers.
PS Emulation PostScript emulation, compatible
with Adobe PostScript language.
Resource
Save
To determine what the printer does
with downloaded resources, such
as fonts and macros stored in
RAM, if the printer receives a job
that requires more memory than is
available.
Off* Printer retains downloaded
resources only until memory is
needed. It then deletes those
resources associated with the
inactive printer language.
On Printer retains all downloaded
resources for all printer languages
during language changes and
printer resets. If the printer runs
out of memory, 38 Memory Full
is displayed.
Toner Alarm To specify how the printer
responds when it is low on toner.
Off* An error message is displayed until
someone replaces the toner
cartridge. If an Auto Continue
value is selected from the Setup
Menu, the printer resumes printing
after the specified timeout value.
Single Printer stops printing, displays an
error message, and sounds three
quick beeps.
Continuous Printer stops printing, displays an
error message, and repeats three
beeps every 10 seconds until the
toner cartridge is replaced.
Menu Item Purpose Values

Table of Contents

Other manuals for Lexmark C510

Related product manuals