Understanding printer messages
174
Understanding printer messages
Disk Corrupted.
Reformat?
The printer has attempted a disk
recovery process and cannot repair
the disk.
Press Go to reformat the disk and delete
all files currently stored on the disk.
Press Stop to clear the message without
reformatting the disk. The printer may
display Disk Recovery and attempt to
recover the disk.
See also: Disk Recovery x/5 yyy%
Disk Recovery
x/5 yyy%
The printer is attempting to recover
the hard disk. Disk recovery takes
place in five phases; the second line
on the operator panel display shows
the percent complete of the current
phase.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Enabling Menus The printer is responding to a
request to make the menus
available to all users.
Wait for the message to clear, and then
press Menu to view the menus from the
operator panel.
See also: Enabling menus
Engine Warming The printer is warming the fuser
assembly to prepare for printing.
Wait for the message to clear.
Enter PIN:
=___
The printer is waiting for you to
enter your four-digit personal
identification number (PIN).
Use the operator panel buttons to enter
the PIN you identified in the driver when
you sent the confidential job to the
printer.
See also: Accessing held jobs from
the operator panel; Entering a
personal identification number (PIN)
Flushing Buffer The printer is flushing corrupted
print data and discarding the current
print job.
Wait for the message to clear.
Formatting Disk
DO NOT POWER OFF
The printer is formatting the hard
disk. When formatting takes longer
than usual, the second line of the
display shows the percent complete.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Formatting Disk
yyy%
The printer is formatting the hard
disk. When formatting takes longer
than usual, the second line of the
display shows the percent complete.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Formatting Flash
DO NOT POWER OFF
The printer is formatting the flash
memory.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Message What this message means What you can do