Setup Menu
163
Using printer menus
Jam
Recovery
To establish whether the printer
reprints jammed pages.
On Printer reprints jammed pages.
Off Printer does not reprint jammed
pages.
Auto* Printer reprints a jammed page
unless the memory required to
hold the page is needed for other
printer tasks.
Job
Accounting
To store statistical information
about your most recent print jobs
on the hard disk. The statistics
include whether the job printed
with or without errors, the print
time, the job size (in bytes), the
requested paper size and paper
type, the total number of printed
pages, and the number of copies
requested.
Note: Job Accounting is only
displayed when a hard disk is
installed, is neither defective nor
Read/Write or Write protected, and
Job Buffer Size is not set to 100%.
Off* Printer does not store job statistics
on disk.
On Printer stores job statistics for the
most recent print jobs.
Left Margin Allows for a shift right or left of the position of the left margin for the 530-sheet tray (Tray
2) or the duplex unit in order to align it properly with the standard tray (Tray 1) left margin.
The margin can be set from -7 to 7 using increments of 1. Each number represents a 0.5
mm adjustment of the left margin. Selecting Left Margin value causes the Alignment
Page to print.
1 Select a device. Tray 2
Duplex
2 Select the increment value. 1 to 15 Specify increments of 1.0 with
each representing a 0.5 mm
adjustment of the left margin.
Page
Protect
To successfully print a page that
may otherwise generate Complex
Page errors.
If, after selecting On, you still
cannot print the page, you may
also have to reduce the size and
number of fonts on the page, or
increase the installed printer
memory.
For most print jobs, you do not
need to select On. When On is
selected, printing may be slower.
Off* Prints a partial page of data if
memory is insufficient to process
the entire page.
On Ensures that an entire page is
processed before it prints.
Menu Item Purpose Values
To Next Page
Loading...
