Lexmark C510 - Page 176

Understanding printer messages
176
Understanding printer messages
Load Tray <x> The printer is trying to feed media
from a source it detects is empty.
• Load media of the size and type
requested in the second line of the
display in the specified tray. The
printer automatically clears the
message and continues printing the
job.
• Press Menu to open the Job Menu
and cancel the current job.
See also: Loading the trays
Menus Disabled The printer menus are disabled. You
cannot change the printer settings
from the operator panel.
You can still open the Job Menu to
cancel a job that is printing or to select a
confidential job or a held job that you
want to print. If you need access to the
printer menus, contact your network
administrator.
See also: Disabling operator panel
menus; Enabling menus
Network Card Busy An internal print server (also called
an internal network adapter or INA)
is being reset.
Wait for the message to clear.
Network A network interface is the active
communication link.
Wait for the message to clear.
Network <x>
Network <x>, <y> A network interface is the active
communication link, where <x>
represents the active
communication link and <y>
represents the channel.
Wait for the message to clear.
No Jobs Found.
Retry?
The four-digit personal identification
number (PIN) you entered is not
associated with any confidential
print job.
• Press Go to enter another PIN.
• Press Stop to clear the PIN entry
prompt.
See also: Accessing held jobs from
the operator panel
Not Ready The printer is not ready to receive or
process data. Someone pressed
Stop to take the printer offline.
Press Go to make the printer ready to
receive jobs.
Parallel A parallel interface is the active
communication link.
Wait for the message to clear.
Parallel <x>
Performing Self Test The printer is running the series of
start-up tests it performs after it is
turned on.
Wait for the message to clear.
Message What this message means What you can do