Loading envelopes in the standard tray
46
Media specifications
6 Load envelopes flap side down with the stamp area and flap on the right. The end of the
envelope with the stamp area enters the printer first.
Note: Some envelopes may feed better with the flap loaded to the left. Try printing a few
envelopes before printing large quantities.
Warning: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer. The stamp is
shown in the illustration only for placement.
7 Insert the standard tray.
To Next Page
Loading...
