12
Set up MFP and options
Unlock the scanner After you have finished assembling your
MFP, you must unlock the scanner.
Note: The scanner is shipped in a locked position to
prevent damage. We highly recommend that you lock the
scanner anytime you move the MFP.
To unlock the scanner:
1 Locate the scanner lock under the
left side of the scanner flatbed on
the MFP.
2 Move the locking mechanism
toward the front of the MFP.
To lock the scanner (if you move your
MFP after initial setup):
1 Make sure the scanner is in the
Ready (idle) state.
2 Turn off and unplug the scanner.
3 Move the locking mechanism
toward the back of the MFP. This
locks the scanner.
What do I do next?
Task Go to page…
After you have installed MFP optional drawers, attached
the ADF tray, and unlocked the scanner, you are now
ready to install optional memory cards.
13
To Next Page
Loading...
