44
Verify MFP setup
6 Verify that the paper trays are configured for the sizes and types
of paper you loaded.
Printing a network
setup page
If the MFP is attached to a network, print a network setup page to verify
the network connection. This page also provides important information
that helps you configure for network printing.
1 Make sure the MFP is on.
2 Press the administration button and then select Print
Reports.
3 Choose Network Setup Page, and then press ✓. The
network setup page prints automatically.
Note: Save the network
setup page after it prints. You
will use it in the other steps.
4 On the network setup page, confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network administrator for a solution, and then print another
network setup page to verify that you are connected to your
network.
Printing a local
test page
If the MFP is attached directly to your computer, print a test page to
verify the MFP and computer are communicating properly.
Windows 1 From the Start menu, click Settings Æ Printers.
2 From the Printers folder, right-click the icon for your local MFP.
3 Select Properties from the sidebar menu.
4 From the General tab, click Print Test Page.
To Next Page
Loading...
