51
Install drivers for network printing
Using the peer-to-peer method
With this method, the print driver is fully installed on each client
computer. Network clients retain control of driver modifications. The
client computer handles the print job processing.
1 Click Start Æ Settings Æ Printers.
2 Click Add Printer to launch the Add Printer wizard.
3 Click Network Print Server.
4 Select the network MFP from the Shared printers list. If the MFP
is not listed, enter the path of the MFP in the text box.
The path will look similar to the following:
\\<server host name>\<shared MFP name>
Note: If this is a new MFP,
you may be prompted to
install a print driver. If no
system driver is available,
then you will need to provide
a path to available drivers.
The server host name is the name of the server computer that
identifies it to the network. The shared MFP name is the name
assigned during the server installation process.
5 Click OK.
6 Select whether you want this MFP to be the default for the client,
and then click Finish.
7 Print a test page to verify MFP installation.
Macintosh
Note: A PostScript Printer
Description (PPD) file
provides detailed
information about the
capabilities of an MFP to
your Macintosh computer.
A PostScript Printer Description (PPD) file must be installed on each
computer used to print to a network MFP. In addition, the computer
must also have a print queue in Print Center (Mac OS X). A print queue
can be created either through AppleTalk or IP Printing. Follow the
instructions for your operating system to install a PPD file and create
a desktop MFP or print queue.
Follow the instructions to install a PPD file and create a print queue.
Mac OS X Step 1: Install a custom PPD file
1 Insert the drivers CD.
2 Double-click the installer package for your MFP.
To Next Page
Loading...
