52
Install drivers for network printing
3 On the Authorization screen, choose Click the lock to make
changes.
4 Enter your password, and then click OK.
5 Click Continue on the Welcome screen and again after you
view the Readme file.
Note: A PPD for your MFP
is also available in a
downloadable software
package on our Lexmark
Web site at
www.lexmark.com.
6 Click Continue after you view the license agreement, and
then click Agree to accept the terms of the agreement.
7 Select a Destination, and then click Continue.
8 On the Easy Install screen, click Install. All the necessary
software is installed on your computer.
9 Click Close when installation is complete.
Step 2: Create a print queue in Print Center
Using AppleTalk
Follow these steps to create a print queue using AppleTalk. To create
an IP print queue, see “Using IP Printing” on page 53.
1 Open Finder, click Applications, and then click Utilities.
2 Double-click Print Center.
3 Choose Add Printer from the Printers menu.
4 Choose AppleTalk from the pop-up menu.
Note: If you don’t know
which zone or MFP to select,
look on the network setup
page under the AppleTalk
heading.
5 Select the Apple Talk zone from the list.
6 Select the new MFP from the list, and then click Add.
7 Verify MFP installation:
a Open Finder, click Applications, and then click TextEdit.
b Choose Print from the File menu.
c Choose Summary from the Print Panel menu.
d Do one of the following:
• If the PPD file displayed in the Summary window is
correct for your MFP, then MFP setup is complete.
• If the PPD file displayed in the Summary window is not
correct for your MFP, delete the MFP from the printer list
To Next Page
Loading...
