13
Install optional memory cards
Step 4: Install optional memory
cards
CAUTION: If you are installing memory cards sometime
after setting up the MFP, turn the MFP off and unplug the
power cord before continuing.
You can customize your MFP memory
capacity and connectivity by adding
optional cards.
The instructions in this section help you
install any of the following memory cards:
– MFP memory
– Flash memory or font cards
Opening the side door
1 Open the front door and the
multipurpose feeder door.
2 Firmly press the two tabs
simultaneously to free them from
their slots.
3 Slide the side door off of the back
of the MFP as you swing it out to
remove it.
4 Set the door aside.
To Next Page
Loading...
