Lexmark X422 - Step 15: Set up Your E-Mail Server

59
Set up your e-mail server
Step 15: Set up your e-mail
server
In order to use the e-mail function on your MFP, you must set up the
e-mail server first. Your e-mail server settings must be configured
using the MFP resident Web page.
To access the resident Web page:
Note: If you do not know the
IP address of your MFP, you
can find it on the network
setup page (for help, see
“Printing a network
setup page” on page 44).
1 Type the MFP’s IP address in the URL address field of your
browser (for example, http://192.168.236.24).
2 Click Configuration from the left column.
3 Click E-mail/FTP Settings from the Default Settings column.
4 Click Server Setup at the bottom of the page. Enter the settings
for your e-mail server.
Setting Type of entry Information
Primary SMTP
Gateway
Numeric IP address of the primary
SMTP gateway
Primary SMTP
Gateway Port
Numeric Default:
25
Secondary SMTP
Gateway
Numeric IP address of the
secondary SMTP gateway
Secondary SMTP
Gateway Port
Numeric Default:
25
SMTP Timeout Numeric 5–30 seconds
Default:
5 seconds