15
Install optional memory cards
Installing an MFP memory card
Warning: Memory cards are easily damaged by static
electricity. Touch something metal on the MFP before you
touch a card.
1 Unpack the memory card. Avoid
touching the connection points
along the edge of the card.
2 Push open the latches on both
sides of the memory connector.
3 Align the notches on the card with
the notches on the connector.
4 Push the memory card firmly into
the connector until the latches on
both ends snap into place.
5 Make sure the latch fits over the
notch on the end of the card.
Note: Some memory options offered for other Lexmark
MFPs cannot be used with your MFP. Refer to the
publications CD for memory specifications.
Installing an optional flash memory
or font card
Follow the instructions in this section to
install an optional flash memory or font
card. The system board has one
connection location which can support
either one flash memory card or one font
card.
To Next Page
Loading...
