16
Install optional memory cards
Warning: Optional flash memory and font cards are
easily damaged by static electricity. Touch something
metal on the MFP before you touch a card.
1 Unpack the flash memory or font
card.
Avoid touching the metal pins on
the bottom of the card. Save the
packaging.
2 Holding the flash memory or font
card by its sides, align the plastic
pins on the card with the holes on
the system board.
Note: Do not pivot the card into the slot. Align the pins on
the card with the system board and push the card straight
in. The row of metal pins on the card must be fully inserted
along its entire length.
3 Push in until the flash memory or
font card is firmly in place.
Plastic pins
Metal pins
Card
To Next Page
Loading...
