65
Notices
Notices
Electronic emission notices
FCC rules Part 15
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
The FCC Class A limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference, in which case the user will be
required to correct the interference at his own
expense.
The manufacturer is not responsible for any radio
or television interference caused by using other
than recommended cables or by unauthorized
changes or modifications to this equipment.
Unauthorized changes or modifications could void
the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations
on electromagnetic interference for a Class A
computing device, use a properly shielded and
grounded cable such as Lexmark part number
12A2405 for USB attach. Use of a substitute cable
not properly shielded and grounded may result in a
violation of FCC regulations.
Industry Canada compliance statement
This Class A digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis de conformité aux normes de l’industrie
du Canada
Cet appareil numérique de la classe A respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
European Community (EC) directives
conformity
This product is in conformity with the protection
requirements of EC Council directives 89/336/EEC,
73/23/EEC, and 1999/5/EC on the approximation
and harmonization of the laws of the Member
States relating to electromagnetic compatibility and
safety of electrical equipment designed for use
within certain voltage limits and on radio equipment
and telecommunications terminal equipment.
A declaration of conformity with the requirements
of the directives has been signed by the Director of
Manufacturing and Technical Support, Lexmark
International, S.A., Boigny, France.
This product satisfies the Class A limits of EN
55022 and safety requirements of EN 60950.
To Next Page
Loading...
