53
Install drivers for network printing
in Print Center and repeat “Step 1: Install a custom PPD
file” on page 51.
Using IP Printing
Follow these steps to create a print queue using IP Printing. To create
an AppleTalk print queue, see “Using AppleTalk” on page 52.
1 Open Finder, click Applications, and then click Utilities.
2 Double-click Print Center.
3 Choose Add Printer from the Printers menu.
4 Choose IP Printing from the pop-up menu.
5 Enter the IP address or the MFP DNS name in the Printer’s
Address box.
6 Choose Lexmark from the Printer Model pop-up menu.
7 Select the new MFP from the list, and then click Add.
8 Verify MFP installation:
a Open Finder, click Applications, and then click TextEdit.
b Choose Print from the File menu.
c Choose Summary from the Print Panel menu.
d Do one of the following:
• If the PPD file displayed in the Summary window is
correct for your MFP, then MFP setup is complete.
• If the PPD file displayed in the Summary window is not
correct for your MFP, delete the MFP from the printer list
in Print Center and repeat “Step 1: Install a custom PPD
file” on page 51.
UNIX/Linux Your MFP supports many UNIX and Linux platforms, such as Sun
Solaris and Red Hat. Visit our Lexmark Web site at
www.lexmark.com for a complete list of supported UNIX and Linux
platforms.
To Next Page
Loading...
