35
Attach cables
Step 8: Attach cables
CAUTION: Do not connect
or disconnect a
communication port, a
telephone cord, or any other
connector during a lightning
storm.
The MFP can be attached to a network or directly to a computer to
print locally.
If the MFP is locally attached, remember to install your drivers first
before attaching your cables. See Step 1: “Install drivers for local
printing and scanning” on page 1, if you have not already installed the
drivers.
Attaching the
telephone cord
1 Connect the MFP to the telephone jack using the telephone line.
2 Plug one end of the telephone cord into the socket at the back
of the MFP and the other end into a telephone jack.
To Next Page
Loading...
